Environment Controls

The CAENIB Series automation enclosures are designed to house Crestron's CLXI-Series lighting control modules with optional load-side circuit breakers, and a PAC2 or PAC2M control system. CAENIB enclosures are available in an assortment of sizes, suitable for surface or flush wall mount installation. Each model has been engineered to provide a clean and manageable installation with abundant provisions for wire termination and electrical knockouts.

Designed for the CAENIB Series Automation Enclosures, these blank plates are used to fill the holes in the enclosure cover panel in front of any terminal block position that does not have a CLTIBN type circuit breaker terminal block installed. A set quantity of blank plates is included with each enclosure. The CAENIB-BP provides 5 additional blank plates and hardware.

The CH-RTHS-N is a wall mount temperature and relative humidity sensor. It mounts in a single‑gang UK or EU style electrical box and communicates directly with any Crestron® Control System via the Cresnet® control network. A complete installation requires an FP-INTENSE FP-PURE series faceplate (sold separately).

The CH-RTHS-N is a wall mount temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.  A complete installation requires an FP-INTENSE or FP-PURE series faceplate (sold separately).

The CH-RTHS-N is a wall mount temperature and relative humidity sensor. It mounts in a single‑gang UK or EU style electrical box and communicates directly with any Crestron® Control System via the Cresnet® control network. A complete installation requires an FP-INTENSE or FP-PURE series faceplate (sold separately).

The CH-RTHS-N is a wall mount temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.

The CH-RTHS-WM is a surface mount temperature and relative humidity sensor that communicates directly with any Crestron® Control System via the Cresnet® control network.

To ensure premium electrical circuit protection for our CAEN-MLO automation enclosures, Crestron has selected Eaton Type CH circuit breakers. These breakers are available directly from Crestron in a choice of thermal magnetic, ground fault, and combination arc fault breaker types.

To ensure premium electrical circuit protection for our CAEN-MLO automation enclosures, Crestron has selected Eaton Type CH circuit breakers. These breakers are available directly from Crestron in a choice of thermal magnetic, ground fault, and combination arc fault breaker types.

To ensure premium electrical circuit protection for our CAEN-MLO automation enclosures, Crestron has selected Eaton Type CH circuit breakers. These breakers are available directly from Crestron in a choice of thermal magnetic, ground fault, and combination arc fault breaker types.

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb). ...

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN circuit breaker terminal blocks are designed to install in CAENIB automation enclosures to provide load-side circuit breakers, and facilitate the termination of high-voltage wiring for each CLXI-Series lighting control module. The color-coded DIN rail design, complete with printed label strips and mounting hardware, provides for a clean and simple installation. Each CLTIBN model includes a front escutcheon panel and hinged door assembly, and weighs approximately 1.82 kg (4.0 lb).

The CLTIBN-BLANK is an empty DIN rail assembly designed to install in a CAENIB automation enclosure to allow for the installation of branch circuit breakers. The CLTIBN-BLANK occupies a single module space in any CAEN automation enclosure, and includes a front escutcheon panel and hinged door assembly. Circuit breakers are not included.

The CLWI-SWEX-delivers native Crestron control to any light or other switched load in new or retrofit 230 Volt applications. Featuring reliable infiNET EX wireless technology, the CLWI-SWEX-can be installed in virtually any location thanks to reliable mesh networking. Support for up to 2 Amp loads makes this switch perfect for most applications.

The CLWI-SWEX-delivers native Crestron control to any light or other switched load in new or retrofit 230 Volt applications. Featuring reliable infiNET EX wireless technology, the CLWI-SWEX-can be installed in virtually any location thanks to reliable mesh networking. Support for up to 2 Amp loads makes this switch perfect for most applications.

The CLXI-4IND inductor module provides noise suppression for up to 4 dimmed loads. Each channel inserts a high-inductance filter choke inline between any channel of a CLXI-Series dimmer module and its load. The CLXI-4IND occupies a single module space in a CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by either a CLTI-4IND terminal block or CLTIBN-4IND circuit breaker terminal block, each sold separately to enable termination of the wiring...

The CNPCI-8 is a power control interface with 8 isolated SPST relays, each rated up to 20 Amps for 120 or 277 Volt AC non-dimmable lighting or power control. The unit is housed in a surface mount NEMA style enclosure, and is designed to communicate with any 2-Series control system via the Cresnet control network. In addition, eight direct inputs are provided to allow for local control using external momentary pushbuttons or contact closures.

The Crestron DIN-AP3MEX is a 3-Series Control System designed for DIN rail mounting applications. Built-in infiNET EX and ER wireless technology makes the DIN-AP3MEX ideal for all types of lighting, shading, AV, and climate control applications wherever a reliable wireless control solution is preferred. Wired Cresnet and Ethernet communication is also supported. Featuring the 3-Series control engine, the DIN-AP3MEX forms the core of any modern networked home or commercial building, managing...