Crestron Green Light Power Pack, 2-Channel 0-10V Dimmer w/infiNET EX Wireless & Built-in Power Monitoring

Get Custom Programming from 4TEC

Price: CALL
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: GLPP-1DIMFLV2EX-PM

    Description

    The Crestron Green Light Power Pack (GLPP) family delivers affordable room lighting control with the essential features for reducing energy usage. Available with up to three channels of switching or 0-10V dimming, each GLPP model includes inputs for a photo sensor and occupancy sensor to control lighting levels automatically based on the amount of natural light and the presence of people in a space, offering a cost-effective and powerful lighting-control solution for classrooms, small offices, and open-plan offices.

    Specifications

    Load Ratings
    • Dim/Switched Channels 1, 2, or 3 switched or dimmed (0-10V) loads (depending on model)
    • Per Unit 16 Amps @ 100-277VAC, 50/60Hz (20 Amps, de-rated to 80%)
    • Dim Load Types (for dimming models): 0-10 Volt fluorescent ballast (4-wire); 0-10V LED drivers; 60 mA max current sink
    • Switch Load Types Fluorescent Ballast, Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, High-Intensity Discharge
    • Relay Lifetime 1,000,000 cycles
    Power Requirements
    • Power Consumption Wired Models: 1.5 Watts @ 120-277V, with no sensors or keypads attached
    • Wireless Models: 2 Watts @ 120-277V, with no sensors or keypads attached
    • Main Power 100-277 Volts AC, 50/60Hz
    • Available Sensor Power 2.5W @ 24 Volts DC (sufficient for powering multiple sensors)
    Controls & Indicators
    • POWER (1) Green LED; indicates line voltage supplied to unit
    • STATUS (1) Red LED; indicates unit is in setup mode
    • STATUS (1) Recessed push button; toggles setup mode
    • IR RECEIVER (1) IR window for use with commissioning remote control
    Connections (Class 1)
    • HOT (1) 14 AWG Class 1 flying lead, black, line in (100-277 VAC)
    • NEUT (1) 14 AWG Class 1 flying lead, white
    • SW HOT (1, 2 or 3) 14 AWG Class 1 flying lead(s), red, switched hot labeled with channel number
    • GROUND (1) 14 AWG Class 1 flying lead, green w/yellow stripe
    Connections (Class 1) Dimming Models Only
    • 0-10V dim(+) (1, 2 or 3) 18 AWG Class 1 flying lead(s), violet, labeled with channel number
    • 0-10V dim(-) (1) 18 AWG Class 1 flying lead, gray
    Connections (Class 2)
    • COM (1) 18 AWG Class 2 flying lead, black; common for sensors, IR and Cresnet®
    • 24V (1) 18 AWG Class 2 flying lead, red, sensor power
    • OCC (1) 18 AWG Class 2 flying lead, orange, signal for occupancy sensor
    • PHOTO (1) 18 AWG Class 2 flying lead, yellow, signal for photo sensor
    • IR (1) 18 AWG Class 2 flying lead, brown wire, connects to IR terminal of GLS-ODT-C-NS or GLS-OIR-C-NS occupancy sensor; if sensors are not present, brown wire can also connect with optional flush-mount, EX ernal IR receiver (GLPPA-IRGW-F)
    • KEYPAD (2) 18 AWG Class 2 flying leads, white w/black stripe; supports up to three (3) GLPPA-KP Power Pack Keypads
    Connections (Class 2) Cresnet Models Only
    • CNET Z (1) 18 AWG Class 2 flying lead, blue, Cresnet Data Z
    • CNET Y (1) 18 AWG Class 2 flying lead, white, Cresnet Data Y
    Connections (Class 2) infiNET EX Models Only
    • Antenna (1) connection for supplied antenna
    Enclosure
    • 20-gauge galvanized steel enclosure; designed for mounting to two (2) adjacent standard 4" square electrical junction boxes[5]; 3-channel versions require a box depth of 2.125 in (54 mm)
    Environmental
    • Temperature 32° to 104°F (0° to 40°C)
    • Humidity 10% to 90% RH (non-condensing)
    Dimensions
    • Height 4.25 in (108 mm)
    • Width 8.63 in (219 mm); 9.88 in (251 mm) with antenna at 90° angle (wireless model only)
    • Depth 2 in (51 mm)
    Weight
    • 2 lb (907 g)
    Standards & Certifications
    • UL916
    • FCC
    • Title 24
    • Relays listed under UL508 Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
    • CEC Title 24 2013 Compliant

    Additional Information

    Key Features
    • Works in 120-277VAC systems
    • Ideal for new construction or retrofits
    • Quick and easy commissioning via optional handheld remote (GLPPA-REMOTE-PROG)
    • Wired or wireless link to central Crestron® system
    • 1, 2, and 3-channel models available
    • Switched and 0-10V dimming models available
    • Integrates with occupancy sensor and photo sensor
    • Supports up to three remote keypads
    • Easy keypad wiring using EX sting switch-loop wiring
    • Optional handheld remote for daily use (GLPPA-REMOTE-USER)
    • Real-time energy monitoring on select models
    • Adaptive zero-cross switching for EX ended life
    • Seamless integration with Crestron AV systems
    • CEC Title 24 2013 Compliant