DigitalMedia 8G™ Single-Mode Fiber Receiver & Room Controller w/Scaler

A DM 8G® Single-Mode Fiber receiver and display controller with built-in HD scaler.

Get Custom Programming from 4TEC

Price: $3,220.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DM-RMC-SCALER-S2

    Description

    The DM-RMC-SCALER-S2 provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® SM Fiber receiver, video scaler, and control interface, providing a single HDMI® output along with Ethernet, USB HID, RS-232, and IR control ports. Built-in scaling enables the connected display to handle any video resolution up to HD 1080p or WUXGA. Its compact, low-profile design allows the DM-RMC-SCALER-S2 to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using one single-mode fiber strand.[1]

    DigitalMedia 8G™ Single-Mode Fiber
    As the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM®) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a home, office, school, or virtually any other facility. The latest generation of DM is called DigitalMedia 8G (DM 8G). Engineered for ultra high-bandwidth and ultimate scalability, DM 8G provides a true one-wire lossless transport for moving high-definition video, audio, Ethernet, and control signals over a choice of twisted pair or fiber optic cable.

    DM 8G SM Fiber uses single-mode fiber to enable long-distance signal distribution across a campus, complex, or municipality. DM 8G SM Fiber handles uncompressed Full HD 1080p video signals with support for 3D, Deep Color, and HDCP, as well as computer signals up to WUXGA. Audio capabilities include support for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over one strand of single-mode fiber, supporting distances up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber optic cable.[1]Multimedia Display Interface
    A single HDMI digital AV output port is provided on the DM-RMC-SCALER-S2 for connection to a display or other device. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable[2].A single fiber strand connects the DM-RMC-SCALER-S2 to a DM switcher or transmitter, transporting video, audio, control, and networking signals all through one simple LC type optical connection.[1] Multiple DM-RMC-SCALER-S2s may be installed to handle each display in a multiroom distribution system, all fed from a central DM-MD series switcher. Or, a single DM-RMC-SCALER-S2 can be fed straight from a DM 8G SM Fiber transmitter, affording a simple solution for extending a computer or AV signal to a single display.High-Definition Scaler
    Through a distributed scaler approach, DigitalMedia delivers an incredibly flexible and user-friendly solution for routing multiple disparate sources to many different display devices. By placing an independent high-performance scaler at every display device, DM ensures an optimal image on every screen no matter what sources are selected. Distributed scaling allows a high-res computer source to be viewed on any display in the building. It also allows a high-definition 3D source to be viewed on lower-resolution 2D displays without compromising the original signal, letting you share your theater's full HD 1080p 3D image with smaller, lesser displays in other rooms.The DM-RMC-SCALER-S2 accepts any video source from standard NTSC 480i to Full HD 1080p60, as well as computer sources from VGA to UXGA/WUXGA, and scales them perfectly to match the native resolution of your video display. A range of common output resolutions are supported to work with virtually any popular flat-panel display, projector, or computer monitor. Intelligent frame rate conversion enables support for 24p and PAL format sources, and 3D to 2D conversion allows 3D content to be fed simultaneously to separate 3D and 2D displays.[3] Setup and use of the scaler is simplified through fully automatic operation utilizing the display's EDID[4]. Dual-Projector 3D Support
    A pair of DM-RMC-SCALER-S2s can be used to facilitate a dual-projector 3D setup, steering just the left eye portion of a 3D signal to one projector, and the right eye portion to the other. This is done using the scaler's 3D to 2D conversion mode, enabling 3D capability with scaling.[3]Video Wall Processing
    The DM-RMC-SCALER-S2 has another trick up its sleeve, providing zoom capability and bezel compensation on its output to display just a portion of the source image. Using this feature, multiple units may be combined to configure a video wall composed of up to 16 individual displays. Configurations of 2x2, 3x2, 3x3, 4x3, or 4x4 are supported, and all that is required is a separate DM-RMC-SCALER-S2 for each display, and a DM switcher with sufficient DM 8G Fiber outputs.LAN Connectivity
    Along with high-definition AV and control, DigitalMedia also integrates high-speed Ethernet networking for a total signal distribution solution. The DM-RMC-SCALER-S2 includes a 10/100 Ethernet port, providing a convenient LAN connection for a local network device.USB Signal Extension
    DigitalMedia allows for the routing of USB signals alongside video and audio. A USB HID compliant mouse or keyboard can be connected directly to the DM-RMC-SCALER-S2 and used to control a computer or media server that’s located at the central equipment cabinet or some other location. Crestron also offers USB over Ethernet Extender Modules (USB-EXT-DM)[5], which may be added to enable support for more USB devices of virtually any type.Embedded Device Control
    The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. The DM-RMC-SCALER-S2 includes built-in RS-232, IR, and Ethernet control ports to allow programmable control of the display device connected to it. But, it can also provide an alternative to such conventional control methods by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-RMC-SCALER-S2 provides a gateway for controlling the display device right through the HDMI connection, potentially eliminating the need for any dedicated control wires or IR emitters.Low-Profile Installation
    Its low-profile design makes the DM-RMC-SCALER-S2 perfect for installation behind a flat panel display or above a ceiling mounted projector. It mounts to a standard 2-gang US, UK, or European electrical box using the mounting bracket provided, affording a clean installation that protrudes less than 1-1/2 inches (37 mm) from the mounting surface.Connections are positioned on the top and bottom of the unit. The design of the mounting bracket allows wires up to 0.23 inches (6 mm) in diameter to extend from the electrical box behind as needed. An array of indicators is provided on the front panel for easy setup and troubleshooting.

    Key Features
    • DigitalMedia 8G™ Single-Mode Fiber receiver, high-definition scaler, and display controller
    • Connects to a DM® switcher or transmitter over one single-mode fiber strand [1]
    • Supports cable lengths up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber [1]
    • Provides one HDMI® or DVI display output [2]
    • Handles any video resolution from standard NTSC 480i or PAL 576i, to HD 1080p60 w/Deep Color
    • Handles any computer resolution from VGA to UXGA/WUXGA
    • Scales the signal to match the native resolution of virtually any digital video display or computer monitor up to 1080p or WUXGA
    • Provides intelligent frame rate conversion
    • Includes content-adaptive noise reduction
    • Allows motion-adaptive de-interlacing or interlacing
    • Allows adjustable overscan or underscan up to 7.5%
    • Provides automatic 3D to 2D signal conversion [3]
    • Automatically passes 3D video without scaling to 3D capable displays [3]
    • Supports left/right eye steering for dual-projector 3D setups [3]
    • Scalable zoom feature enables 2x2, 3x2, 3x3, 4x3, or 4x4 video wall capability [6]
    • Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
    • HDCP compliant
    • Provides a 10/100 Ethernet LAN connection
    • Enables device control via CEC, IR, RS-232, and Ethernet
    • Enables USB HID signal extension for a local keyboard/mouse
    • Compatible with Crestron® USB over Ethernet Extenders [5]
    • Allows quick, easy setup and diagnostics
    • Low-profile design mounts to a 2-gang US, UK, or European wall box
    • Universal power pack included

    Specifications

    Video
    ScalerHD video scaler, motion-adaptive deinterlacer, interlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion[3], content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing (2x2, 3x2, 3x3, 4x3, or 4x4)[6]
    Input Signal TypeDM 8G® SM Fiber (DigitalMedia™ over one single-mode fiber optic strand)[1]
    Output Signal TypesHDMI®, DVI[2]
    FormatsDM 8G SM Fiber & HDMI w/Deep Color & 3D[3], DVI, HDCP content protection support
    Input Resolutions, Progressive640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
    Input Resolutions, Interlaced720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
    Scaler Output Resolutions, Progressive640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz[7], 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz[7], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz[7], 1400x1050@60Hz[7], 1440x900@60Hz[7], 1600x900@60Hz[8], 1600x1200@60Hz, 1680x1050@60Hz[7], 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz[8], 2048x1152@60Hz[8]
    Scaler Output Resolutions, Interlaced720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30)
    Pass-Thru Output ResolutionsMatched to input
    Audio
    Input Signal TypeDM 8G SM Fiber
    Output Signal TypeHDMI
    FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM
    Communications
    Ethernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
    USBSupports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[5]
    RS-2322-way device control and monitoring up to 115.2k baud with hardware and software handshaking
    IR/Serial1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud
    DigitalMediaDM 8G SM Fiber, HDCP, EDID, CEC, Ethernet
    HDMIHDCP, EDID, CEC
    NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control system
    Connectors – Bottom
    HDMI OUT(1) 19-pin Type A HDMI female;
    HDMI digital video/audio output;
    Also supports DVI[2]
    USB HID(1) USB Type A female;
    USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device
    COM(1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port;
    Up to 115.2k baud, hardware and software handshaking support
    IR 1 – 2(1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports;
    IR output up to 1.1 MHz;
    1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
    Connectors – Top
    DM IN SMF/LC(1) LC female optical fiber connector;
    DM 8G Single-Mode Fiber input;
    Connects to DM 8G SM Fiber output of a DM switcher, transmitter, or other DM device via CRESFIBER8G-SM single-mode fiber optic cable[1]
    LAN(1) 8-wire RJ45 female, shielded;
    10Base-T/100Base-TX Ethernet port
    24VDC 0.75A MAX(1) 2.1 x 5.5 mm DC power connector;
    24 Volt DC power input;
    PW-2407WU power pack included
    Connectors – Rear
    G(1) 6-32 screw, chassis ground lug
    Controls & Indicators
    PWR(1) green LED, indicates operating power supplied via local power pack
    DM LINK(1) green LED, indicates DM link status
    VIDEO(1) green LED, indicates video signal presence and lock status
    USB HID(1) green LED, indicates a valid device connection and activity on the USB HID port
    SETUP(1) red LED and (1) miniature recessed pushbutton, for Ethernet setup
    RESET(1) miniature recessed pushbutton, for hardware reset
    DM IN (Top)(1) green LED, indicates DM link status
    LAN (Top)(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
    Power Requirements
    Power Pack0.75 Amps @ 24 Volts DC;
    100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
    Environmental
    Temperature32° to 104°F (0° to 40°C)
    Humidity10% to 90% RH (non-condensing)
    Heat Dissipation45 BTU/Hr
    Enclosure
    ChassisMetal, black finish, vented sides and front
    MountingMounts to a 2-gang electrical box, 2-Gang UK (BS 4662) electrical box, or 2-Gang European (DIN 49073) electrical box
    Dimensions
    Height7.69 in (196 mm)
    Width7.60 in (193 mm)
    Depth1.44 in (37 mm) with mounting bracket
    Weight
    2.09 lb (949 g)