Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Description
The Crestron C2N-AMP-6X100 is a versatile and cost-effective multiroom audio system designed for small to moderate sized houses, condominiums, and businesses. Its integrated multichannel power amp provides ample power for up to six rooms, which can be EX ended simply using additional C2N-AMP-6X100 units, or by connecting external amplifiers via the two extra line-level room outputs. Twelve stereo line inputs are included to accommodate a rack full of music and AV sources. With many of the same pro features as Crestron's more extensive systems, the C2N-AMP-6X100 lets everyone enjoy their own choice of music, sports, news, or talk in any room as part of a complete Crestron system.
Specifications
Audio- Features 12x8 stereo matrix switcher, 8-channel audio processor, 6-channel stereo power amplifier, input compensation, amp bridging, fault detection and protection
- Input Signal Types Stereo analog line (unbalanced)
- Output Signal Types Stereo speaker level, stereo analog line (unbalanced)
- Adjustments – typical of 12 stereo inputs (ANALOG SOURCES 1 – 12):
- Input Compensation 10.0 dB per input
- Adjustments – typical of 8 stereo room outputs (SPEAKER OUTPUTS 1 – 4, SPEAKER/LINE OUTPUTS 5 – 6, ROOM OUTPUTS 7 – 8):
- Volume Control -80 to +20 dB
- Bass Control 12 dB @ 100 Hz, 2 dB steps
- Treble Control 12 dB @ 20 kHz, 2 dB steps
- Loudness Compensation On/Off
- Balance Control Left/Right adjustable
- Performance – typical of 6 stereo amplified outputs (SPEAKER OUTPUTS 1 – 6):
- Output Power 50 Watts per channel at 8 Ohms;
- 75 Watts per channel at 4 Ohms;
- 150 Watts mono at 8 Ohms bridged
- Frequency Response 20 Hz to 20 kHz 1 dB
- THD+N 0.25%, 1 kHz, 50W @ 8 Ohms
- S/N Ratio 100 dB, 20 Hz to 20 kHz, A-weighted
- Performance – typical of 4 stereo unamplified outputs (LINE OUTPUTS 5 – 6, ROOM OUTPUTS 7 – 8):
- Frequency Response 20 Hz to 20 kHz 0.5 dB
- THD+N 0.05%, 20 Hz to 20 kHz
- S/N Ratio 110 dB, 20 Hz to 20 kHz, A-weighted
Communications- Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplEX DHCP
Connectors- ANALOG SOURCES L/R IN 1 – 12 (24) RCA female comprising (12) unbalanced stereo line-level audio inputs;
- Maximum Input Level: 2 Vrms;
- Input Impedance: 10k Ohms
- ANALOG SOURCES L/R OUT 1 – 12 (24) RCA female comprising (12) unbalanced stereo loop-thru outputs;
- Paralleled with inputs, connect to additional C2N-AMP-6X100 units or other audio preamplifier/receiver
- SPEAKER OUTPUTS L/R 1 – 6 (6) 4-pin 5mm detachable terminal blocks;
- Wire Size: Terminals accept up to 14 AWG
- LINE OUTPUTS L/R 5 – 6 (4) RCA female comprising (2) unbalanced stereo line-level audio outputs (same signal as SPEAKER OUTPUTS 5 – 6);
- Maximum Output Level: 2 Vrms;
- Output Impedance: 100 Ohms
- ROOM OUTPUTS L/R 7 – 8 (4) RCA female comprising (2) unbalanced stereo line-level audio outputs;
- Maximum Output Level: 2 Vrms;
- Output Impedance: 100 Ohms
- NET (2) 4-pin 3.5mm detachable terminal blocks;
- Cresnet slave ports, paralleled
- LAN (1) 8-wire RJ45 female;
- 10Base-T/100Base-TX Ethernet port
- 120V~50/60Hz MAX 5A (1) IEC 60320 C14 main power inlet;
- (US/North America) Mates with removable power cord (included)
- 220-240V~50/60Hz MAX 2.5A (International) (1) IEC 60320 C14 main power inlet;
- Mates with removable power cord (not included)
- G 6-32 screw, chassis ground lug
- COMPUTER (front) (1) USB Type B female;
- USB computer console port;
Controls & Indicators- SOURCE 1 – 12 (12) pushbuttons and green LEDs, select input source for routing
- ROOM 1 – 8 (8) pushbuttons and green LEDs, select output zone for routing and volume adjustment
- VOL /V (2) pushbuttons, adjusts audio volume for selected output
- FAULT (1) red LED, indicates a Temperature, DC, or Over Current fault condition
- NET (1) amber LED, indicates communication with Cresnet system
- PWR (1) bi-color LED, amber indicates standby or booting up, green indicates amplifier is on
- On/Off (1) rocker switch, turns unit on and off
- SETUP (rear) (1) recessed miniature pushbutton and (1) red LED, for Cresnet and Ethernet configuration
- LAN (rear) (2) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
Power Requirements- Main Power 5 Amps @ 120 Volts AC, 60 Hz
- Main Power 2.5 Amps @ 220-240 Volts AC, 50/60 Hz
Environmental- Temperature 41° to 104°F (5° to 40°C)
- Humidity 10% to 90% RH (non-condensing)
- Heat Dissipation 650 BTU/hr @ 8 Ohms, 400 BTU/hr @ 4 Ohms, all amplifier channels at 1/8th output power;
- 85 BTU/hr idle, all amplifier channels off
Enclosure- Chassis Metal with black finish, vented sides, fan-cooled
- Front Panel EX ruded metal with black finish and polycarbonate label overlay
- Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
DimensionsWeight- C2N-AMP-6X100 25.0 lb (11.4 kg)
- C2NI-AMP-6X100 26.4 lb (12.0 kg)
Additional Information
Key Features- Affordable audio distribution for six rooms, EX andable for up to 24 rooms
- Additional line-level room outputs enable support for two additional zones (EX andable up to eight)
- Integrated 12-channel amplifier delivers 50 W/Ch. @ 8 and 75 W/Ch. @ 4
- Each amplified room output is bridgeable for 150 W @ 8 (mono)
- Provides support for passive or active powered subwoofers
- Features independent control of volume, bass, treble, and other settings per room/zone
- Includes twelve stereo line inputs with loop-thru for easy EX ansion
- Includes front panel controls for source selection and volume control
- Front panel is customizable using Crestron® Engraver software or pre-printed labels provided
- Allows for Crestron system integration via Cresnet® or Ethernet