Shade and Drape Controller, 2 outputs for 24 VDC 2-wire bidirectional motors

Get Custom Programming from 4TEC

Price: $403.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: C2N-SDC-DC

    Description

    The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor.

    Specifications

    Load Ratings
    • Motor Control Channels 2
    • Per Channel 30 Watts (1.25 Amps) @ 24 Volts DC
    • Total 30 Watts (1.25 Amps) @ 24 Volts DC
    • Load Type 2-Wire 24V DC bidirectional motors, Somfy® LT28B or similar
    Power Requirements
    • Cresnet Power Usage Up to 33 Watts (1.38 Amps @ 24 Volts DC) depending on motor load, dedicated power supply recommended
    Connections – Front Panel
    • AB 1 – 2 (2) 2-pin 3.5mm detachable terminal blocks providing (2) 24V DC 2-wire bidirectional motor control outputs
    • NET (1) 4-pin 3.5mm detachable terminal block;
    • Cresnet slave port, connects to Cresnet control network
    Buttons
    • 1 UP/DOWN (2) buttons for local control of output #1
    • 2 UP/DOWN (2) buttons for local control of output #2
    • SETUP (1) button used for touch-settable ID (TSID)
    LED Indicators
    • PWR (green) Indicates DC power supplied from Cresnet network
    • NET (yellow) Indicates communication with the Cresnet system
    • SETUP (red) used for touch-settable ID (TSID)
    Environmental
    • Temperature 41° to 122°F (5° to 50°C)
    • Humidity 10% to 90% RH (non-condensing)
    Enclosure
    • Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth
    Dimensions
    • Height 4.10 in (104.2 mm)
    • Width 4.10 in (104.2 mm)
    • Depth 1.16 in (29.5 mm)
    Weight
    • 0.55 lb (0.25 kg)