• Crestron HD-RX-101-C-1G-E-B-T - HD-RX-101-C-1G-E-B-T
  • Crestron HD-RX-101-C-1G-E-B-T - HD-RX-101-C-1G-E-B-T
Spotlight!

DM Lite – HDMI® over CATx Receiver, Wall Plate, Black Textured

Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K.

Price: $437.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: HD-RX-101-C-1G-E-B-T

    Description

    The HD-RX-101-C-1G-E-B-T is a wall plate DM Lite receiver designed to pair with a DM Lite transmitter to form a point-to-point signal extender for HDMI® signals. The DM Lite family of products offers a very simple and versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.[1]

    For applications requiring a surface mount version, refer to the HD-RX-101-C-E.
    For applications that require IR or RS-232 signal extension, refer to the HD-RXC-101-C-1G-E-B-T.

    The HD-RX-101-C-1G-E-B-T is designed to mount in a single-gang electrical box or plaster ring (not included). It is normally powered by the transmitter over the link cable when using a surface mount transmitter. If using a wall plate transmitter, a single power pack must be purchased (sold separately, model TBA), which may be connected to either the receiver or transmitter.[2]

    Important: This product is not addressable from a control system and offers no programmable functionality. AV and CEC signals are simply passed through between a single transmitter and receiver pair. The RJ45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite is not compatible with PoE, PoDM, DigitalMedia 8G+® (DM 8G+®), or HDBaseT®.

    Key Features
    • Pairs with a DM Lite transmitter to provide a simple point-to-point signal extender
    • Enables extension of HDMI® video and audio signals
    • Links to the transmitter via a single CAT5e (or better) twisted pair cable [1]
    • Supports 4K and UHD at up to 130 ft (40 m)
    • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
    • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
    • Handles 3D video and Deep Color
    • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
    • Compatible with HDMI and DVI display devices[3]

    Specifications

    Video
    Output Signal TypeHDMI w/Deep Color, 3D, & 4K (DVI compatible [3])
    Copy ProtectionHDCP 2.2

    Maximum Resolutions

    Scan
    Type
    ResolutionFrame
    Rate
    Color
    Sampling
    Color
    Depth
    Progressive4096x2160 DCI 4K
    &
    3840x2160 4K UHD
    24 Hz4:4:430 bit
    30 Hz4:4:424 bit
    30 Hz4:2:236 bit
    60 Hz4:2:024 bit
    2560x1600 WQXGA60 Hz4:4:436 bit
    1920x1080 HD 1080p60 Hz4:4:436 bit
    Interlaced1920x1080 HD 1080i30 Hz4:4:436 bit

    NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
    Audio
    Output Signal TypeHDMI
    FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
    Communications
    HDMIHDCP 2.2, EDID, CEC pass-through
    DM Lite LinkProprietary link for connection between one DM Lite TX & RX only
    Connectors
    HDMI OUT(1) HDMI Type A connector, female;
    HDMI digital video/audio output (DVI compatible [3])

    FROM TX (rear)

    (1) 8-pin RJ45 connector, female, shielded;
    Link port for connection to a DM Lite transmitter [1]
    24VDC 1.25A (rear)(1) 2-pin 3.5 mm detachable terminal block;
    24 Volt DC power input;
    Power pack sold separately (if required, model TBA) [2];
    Note: This connection powers both the receiver and transmitter; this connection is not normally used when pairing with a surface mount transmitter.[2]
    Indicators
    PWR(1) Green LED, indicates operating power is supplied from the TX via the DM Lite link or from a power pack via the 24VDC input
    HDMI OUT(1) Green LED, indicates HDMI output signal presence
    FROM TX(2) LEDs (on RJ45 connector), green LED indicates link status, amber LED indicates a valid video signal
    Power
    Power Pack (sold separately)Input: 100-240 Volts AC, 50/60 Hz;
    Output: 1.25 Amps @ 24 Volts DC;
    Model: TBA
    Note: This power pack is only required when pairing with a wall plate transmitter. When pairing with a surface mount transmitter, use the power pack supplied with that transmitter. The receiver and transmitter are powered together using a single power pack connected at either the receiver or transmitter (not both).[2]
    Environmental
    Temperature32° to 104° F (0° to 40° C)
    Humidity20% to 90% RH (non-condensing)
    Construction
    CompositionMetal housing and bracket with black polycarbonate front label overlay
    MountingMounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
    FaceplateRequires a decorator-style faceplate (FP-G series, sold separately)
    Dimensions
    Height4.08 in (104 mm)
    Width1.81 in (46 mm)
    Depth1.97 in (50 mm)
    Weight
    5.22 oz (148 g)
    Compliance
    UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
    Maximum DM Lite Link Cable Lengths


    Resolution
    Cable Type
    CAT5e (or better),
    DM-CBL-ULTRA DM® Ultra Cable, or
    DM-CBL-8G DM 8G DM 8G® Cable [1]
    1920x1080 FHD 1080p230 ft (70 m)
    1920x1200 WUXGA
    1600x1200 UXGA
    2048x1080 DCI 2K
    2048x1152 QWXGA
    2560x1080 UWFHD130 ft (40 m)
    2560x1440 WQHD
    2560x1600 WQXGA
    3840x2160 4K UHD
    4096x2160 DCI 4K