DigitalMedia™ Ultra Patch Cable, 1.5 ft (0.45 m)

Fully-shielded CAT6a patch cables for use with Crestron® DM 8G+®, HDBaseT®, and 10GBase-T Ethernet.

Get Custom Programming from 4TEC

Price: $35.00
    Quantity:
    Availability: In Stock
    Usually ships In 24 - 48 hours

    Item #: DM-CBL-ULTRA-PC-1

    Description

    The DM-CBL-ULTRA-PC is a shielded CAT6a patch cable designed for use with all Crestron® DigitalMedia 8G+® (DM 8G+®) products, as well as HDBaseT® and 10GBase-T Ethernet. Using the DM-CBL-ULTRA-PC in combination with other Crestron DM® Ultra structured cabling products ensures the highest performance and reliability for distributing Ethernet data and uncompressed 4K/60 video.

    The DM-CBL-ULTRA-PC is the ultimate Category 6A patch cable. Its innovative PCB-based plug design optimizes signal tuning for exceptional transmission. Advanced contact technology provides decreased variability and greater reliability over traditional crimp-type plugs. Category 7 S/FTP stranded cable is used to enable optimal transmission performance while eliminating alien crosstalk. Every DM Ultra patch cable is 100% factory tested to ensure full performance and compliance.

    Key Features
    • Fully-shielded CAT6a patch cable
    • Unique PCB-based RJ45 plug design
    • 360 degree shield coverage
    • Low-profile, snag-resistant boot design
    • Robust strain and bend relief
    • Cantilevered latch for enhanced accessibility
    • High-performance CAT7 S/FTP stranded cable
    • Alien crosstalk preventive construction
    • Ultimate performance for 10GBase-T Ethernet, HDBaseT®, and Crestron® DM 8G+®
    • Sold in eight lengths from 1.5 to 50 ft (0.45 to 15 m)
    • 100% factory tested

    Specifications

    Electrical
    CompatibilityCAT5e, CAT6, CAT6a
    Contact Resistance10 mΩ
    Input to Output Resistance200 mΩ
    Insulation Resistance500 mΩ
    Dielectric Withstand Voltage1000 Volts DC or AC peak minimum contact to contact
    Current Rating1.5 Amps
    PoE CompatibilityIEEE 802.3at PoE & PoE+
    Surface Transfer Impedance<10 mΩ/m @ 10 MHz
    Mechanical – Plug
    Jack CompatibilityRJ45
    Insertion Cycles2500 minimum
    Retention Force50 N minimum
    Tensile Strength20 lb minimum cable to plug
    Mechanical – Cable
    ConstructionS/FTP
    Wiring StandardsTIA/EIA T568A & T568B
    Conductors26 AWG (0.14 mm²) 7x32 stranded tinned copper
    Jacket TypeCM, LSZH
    Jacket ColorBlue
    Overall Outer Diameter0.25 in (6.35 mm) nominal
    Bend Radius2 in (50 mm)
    Mechanical – General
    Plug Housing MaterialPolycarbonate
    Contact Materials50 microinches gold plating or equivalent
    Plastic MaterialsFlame retardant thermoplastic
    Flammability RatingUL 94V-0
    Green FeaturesRoHS, lead-free, halogen-free, PVC free
    Shielding360 degree coverage
    Environmental
    Temperature14° to 140°F (-10° to 60°C)
    Compliance
    ANSI/TIA-568-C.2, ISO/IEC 11801 Ed 2.2, IEEE 802.3an, IEEE 802.3af, IEEE 802.3at, ANSI/TIA 1096-A, IEC 60603-7-51, UL 1863 and CSA-C22.2 No. 182.4-M90, IEC 60332-1, IEC 60754, IEC 61034, Anatel Resolution No.242,2000