Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Item #: CLW-LSWEX-1GD-W-T
Description
The CLW-LSWEX-is a plug in switch designed to operate as part of a complete Crestron automation system communicating via the infiNET EX wireless control network. Without the need for additional control wiring, the CLW-LSWEX-easily acts in place of a standard light switch for conventional floor and table lamps.
Specifications
Load Ratings- Incandescent/Tungsten Halogen 600 Watts total[3]
- Magnetic Low Voltage 600 VA / 450 Watts total[3]
Wireless- RF Transceiver infiNET EX circledR;2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
- Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities[1]
- Gateway Requires an infiNET EX gateway[2]
Controls and Indicators- Power/Setup (1) Pushbutton per channel with green LED, for load on/off, and setup
ConnectorsPower RequirementsEnclosureEnvironmental- Temperature 32° to 104°F (0° to 40°C)
- Humidity 10% to 90% RH (non-condensing)
DimensionsWeight- Single Channel Model 6.8 oz (190 g)
- Dual Channel Model 7.8 oz (220 g)
Additional Information
Key Features- Convenient wireless lamp controller
- Control system integration via infiNET EX circledR;wireless network
- Plugs into any standard grounded outlet
- 600 Watt load rating
- Single- and dual-channel models available
- Models available for ground pin down and ground pin up outlet configurations