Crestron CLS-EXP-DIMFLV

iLux® 0-10V Dimmer Expansion Module

Works with Crestron iLux®, CLW,[1] and CLX Series dimmers
Emulates the characteristics of the dimmer that is controlling it

Get Custom Programming from 4TEC

Price: $345.00

Quantity:

Estimate Shipping

Availability: In Stock
Usually ships In 24 - 48 hours

Item #: CLS-EXP-DIMFLV

Description

The CLS-EXP-DIMFLV is a 0-10 Volt dimming expansion module for The Crestron iLux Integrated Lighting System (CLS-C6 Series) and other Crestron lighting dimmers. It can also be used to switch non-dimmable loads. A single model supports a 120, 230, or 277 Volt load up to 16 Amps.

Any output channel of the iLux system can be used to control the CLS-EXP-DIMFLV. It is also compatible with CLW Series[1] in-wall dimmers and select CLX Series lighting control modules.[2] The metal enclosure is designed to be mounting to a vertical surface,[3] and it can be installed in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides of the unit. All connections are made via screw terminals behind the front cover.

Key Features

Works with Crestron iLux®, CLW,[1] DIN, and CLX Series dimmers
Emulates the characteristics of the dimmer that is controlling it
Shares a single iLux dimmer channel with up to 4 more Expansion Modules
Provides 0-10 Volt dimming control
Supports 120, 230, or 277 Volt loads up to 16 Amps
Supports switching of non-dimmable lighting loads and motors
Includes built-in air gap relay
Mounts to a wall or above a suspended ceiling
CEC Title 24 2013 Compliant

Specifications

Load Ratings
	Dimmer Channels	1
	Load Rating, Lamp	16 Amps @ 120 to 277 Volts
	Load Rating, Motor	0.5 HP @ 120 Volts, 1 HP @ 230/277 Volts
	Minimum Load	15 Watts @ 120 Volts, 25 Watts @ 230 Volts, 30 Watts @ 277 Volts
	Dim Load Types	0-10 Volt fluorescent ballast or LED driver (4-wire)
	Switch Load Types	LED, incandescent, fluorescent, magnetic low voltage, electronic low voltage, neon/cold cathode, high-intensity discharge (HID), motors
Input Voltages
	Line Power	120 to 277 Volts AC, 50/60 Hz
	Control Input	120 or 230 Volts AC, 50/60 Hz, phase independent of line power and load
Connections
	INPUT, CTRL	(1) Captive screw terminal,[4] control input from CLS(I)-C6 Series, CLW-DIM Series,[1] CLXI)-DIM Series, GLX-DIM6, GLXX-2DIM8, DIN-1DIM4, or DIN-1DIMU4 dimmers; Note: Presents a 25 Watt load to the controlling dimmer; a maximum of 5 CLS-EXP-DIMFLV modules may be connected to the controlling dimmer, which cannot be wired to control any other loads besides the CLS-EXP-DIMFLV modules
	INPUT, NEUT	(1) Captive screw terminal,[4] neutral connection for control input
	OUTPUT, SW OUT	(1) Captive screw terminal,[4] switched load output
	OUTPUT, HOT	(1) Captive screw terminal,[4] line power input
	OUTPUT, NEUT	(1) Captive screw terminal,[4] neutral connection for line power input and load
	0-10V +/-	(2) Captive screw terminals,[4] dimming control output; Class 1 or Class 2 wiring allowed; Control Voltage is 0-10 Volts DC, 70 mA
	GROUND	(1) 3-terminal chassis ground bus bar
Controls & Indicators
	STATUS	(1) Red LED behind front panel, illuminates when load output is on
	POWER	(1) Green LED behind front panel, indicates line power is applied to the HOT terminal
Environmental
	Temperature	32° to 104° F (0° to 40° C)
	Humidity	10% to 90% RH (non-condensing)
	Heat Dissipation	70 BTU/Hr at maximum load, 16A
Enclosure
	Surface mount[3] module with (2) integral mounting flanges, galvanized steel w/gray matte powder coat front panel, extruded aluminum heat sink, and (4) 1/2” or 3/4” conduit knockouts provided on bottom and lower left & right sides
Dimensions
	Height	8.82 in (224 mm)
	Width	6.39 in (163 mm)
	Depth	3.18 in (81 mm)
Weight
	3.34 lb (1.52 kg)
Standards & Certifications
	UL Listed
	CEC Title 24 2013 Compliant