Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Description
The C2N-VEQ4 provides a very simple solution for adding professional quality volume control, equalization, and signal routing to any Crestron2-Series control system. In a compact half-space rack-mountable chassis, the C2N-VEQ4 delivers four channels of digital volume and tone control, four 12-band graphic/parametric equalizers, and a fully-adjustable 4x4 matrix mixer. Dual DSPs and 24-bit 96 kHz A/D and D/A converters attain high-end audio performance perfectly suited for a multitude of applications in boardrooms, auditoriums, night clubs, and homes.
Specifications
Audio- Features 4x4 Matrix Mixer, 4-Channel Digital Audio Processor
- Master Volume -80dB to +20dB, 0.1dB steps (balanced I/O)
- Channel Volume -80dB to +12dB, 0.1dB steps from Media Tools; -80dB to +0dB, 0.1dB steps from SIMPL (balanced I/O)
- Bass/Treble Gain Range 15dB, 0.5dB steps
- Equalization Modes 10-band graphic plus 2-band parametric; 5-band graphic plus 7-band parametric; speech-optimized 5-band graphic plus 7-band parametric; 3-band graphic plus 9-band parametric; or 12-band parametric
- PEQ Filter Gain 12dB, 0.1dB steps from Media Tools; +24/-36dB, 0.1dB steps from SIMPL
- PEQ Filter Bandwidth 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from Media Tools; 0.02 to 3.5 from SIMPL
- PEQ Filter Center Frequency 25Hz to 19.9kHz from Media Tools; 5Hz to 24KHz from SIMPL
- PEQ Filter Types low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf
- GEQ Filter Gain +5/-10dB, 0.1dB steps from Media Tools; 10dB, 0.1dB steps from SIMPL
- GEQ Filter Center Frequencies 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz (10-band); 63, 250, 1k, 4k, 10k Hz (5-band); 160, 600, 1k, 2.5k, 5k Hz (Speech Opt. 5-band); 250, 1k, 4k Hz (3-band)
- Frequency Response 0.1dB 20Hz to 22kHz, 0.5dB 10Hz to 30kHz
- Total Harmonic Distortion (THD) + Noise <0.008% @1kHz
- S/N Ratio >97dB balanced, >95dB unbalanced, 20Hz to 22kHz A-weighted
- Crosstalk > -90dB 20Hz to 22kHz
- Common Mode Rejection >90dB 20Hz to 22kHz
Connectors- IN 1 - 4 (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio inputs;
- Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
- Input Impedance: 10k ohms balanced, 5k ohm unbalanced
- OUT 1 - 4 (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio outputs;
- Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
- Output Impedance: 200 ohms balanced, 100 ohms unbalanced
- NET (1) 4-pin 5mm detachable terminal block, Cresnet slave port;
- Connects to Cresnet control network
- G (1) 6-32 screw, chassis ground lug
Indicators- PWR (green) Indicates 24 Volts DC power supplied from Cresnet control network
- NET (yellow) Indicates communication with Cresnet system
- ACTIVITY 1 – 4 (red) Illuminates when a parameter is being changed on a given channel
- SETUP (rear) (red) Used for Touch-Settable ID (TSID)
Buttons- SETUP (rear) Used for Touch-Settable ID (TSID)
Power Requirements- Cresnet Power Usage 8 Watts (0.34 Amps @ 24 Volts DC)
Environmental- Temperature 32° to 122°F (0° to 50°C)
- Humidity 10% to 90% RH (non-condensing)
Enclosure- Chassis Steel, black matte powder coat finish
- Faceplate EX ruded aluminum, black matte powder coat finish with polycarbonate label overlay
- Mounting Freestanding or 0.5U 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit'sold separately)
Dimensions- Height 1.80 in (4.57 cm);
- 1.70 in (4.32 cm) without feet
Weight
Additional Information
Key Features- 24-bit 96KHz A/D and D/A converters | Dual DSPs
- 4 balanced/unbalanced line-level I/O channels
- Fully adjustable 4 x 4 audio matrix mixer
- Independent volume, bass, treble, and mute per channel
- Relays for -100 dB muting and "thump" prevention
- 12-band parametric or graphic equalization per output channel
- Preset and real-time control with true feedback via cresnet
- Half-rackspace Cresnet EX ansion module