Availability: In Stock
Usually ships In 24 - 48 hours
notify me
Description
The C2N-SSC-2 Somfy Shade Controller is a compact Cresnet device designed to provide a bidirectional serial interface for up to two Somfy ILT[1] Intelligent Shade Motors. Window treatments equipped with the Somfy ILT motor offer enhanced capability compared to typical three-wire models.
Specifications
Connectors- 42006 (2) 4-position, 4-conductor RJ11 female;
- Intelligent Shade Motor control ports;
- Each port provides proprietary serial control of (1) Somfy ILT[1] shade motor;
- Maximum Cable Length: 50 ft (15 m)
- NET (1) 4-pin 5mm detachable terminal block;
- Cresnet slave port, connects to Cresnet control network
Buttons- UP LIMIT (1 – 2) (2) buttons select up limit adjust mode for either motor
- DWN LIMIT (1 – 2) (2) buttons select down limit adjust mode for either motor
- (1) button moves selected shade up while in limit adjust mode
- (1) button moves selected shade down while in limit adjust mode
- SETUP (1) button used for touch-settable ID (TSID)
LED Indicators- PWR (green) Indicates DC power supplied from Cresnet network
- NET (yellow) Indicates communication with the Cresnet system
- SETUP (red) For touch-settable ID (TSID), updating firmware, and setting limits
Power Requirements- Cresnet Power Usage 1.0 Watt (0.04 Amps @ 24 Volts DC)
Environmental- Temperature 41° to 122°F (5° to 50°C)
- Humidity 10% to 90% RH (non-condensing)
Enclosure- Black metal, surface mount box with (2) integral mounting flanges
DimensionsWeight